قیر - Bitumen

قیر ماده‌ای است سیاه رنگ و خمیری شکل که در عایق‌کاری رطوبت و ساخت آسفالت کاربرد دارد. قیر انواع گوناگونی دارد که هر یک از انواع آن، دارای کاربرد خاصی است. قیر از مشتقات نفت است و اغلب در پالایشگاه نفت تولید می‌شود. قیر یک هیدروکربن متراکم، بسیار چسبناک و برگرفته از نفت است که به دو نوع اصلی طبقه‌بندی می‌شود. اولین نوع، قیر طبیعی است که در زیر تپه‌ها و دریاچه‌های نفتی یافت می‌شود و نوع دیگر، قیر تصفیه شده حاصل از ته‌نشینی نفت خام است. قیر حاوی دو درصد اکسیژن، یازده درصد هیدروژن و هشتاد و هفت درصد کربن است.همان‌طور که گفته شد، این محصول یک هیدروکربن با وزن مولکولی بالا شامل روغن، رزین و آسفالتین است. وجود پنج تا سی درصد آسفالتین در قیر باعث سختی قیر می‌شود.

گروه سورین مهام به عنوان یک تامین کننده و توزیع کننده بین المللی می تواند محصولات این بخش را اگر شما آن را تولید می کنید، از شما خریداری کند و هم اگر هم نیاز به این محصول دارید به شما ارائه دهد.

کارشناسان سورین مهام در تمامی پروسه در کنار شما هستند ، با خیال راحت می توانید از طرق زیر با کارشناسان سورین مهام تماس حاصل کرده و هرگونه سوالی دارید بپرسید تا کارشناسان سورین مهام به شما راهنمایی های لازم را ارائه دهند.

انواع محصولات با مشخصات فنی

  • OXIDIZE
  • PENETERATION
  • EMULSION
  • CUTBACK
OXIDIZE

Analysis oxidized bitumen 115/15

Bitumen 115/15Test methodUnitSpecification
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.
Penetration @ 25°cASTM  D5mm/1010/20
Softening point °cASTM  D36°C110/120
Ductility @25 °cASTM  D113Cm1.5min
Loss on heating(wt) %ASTM  D6Wt. %0.2 max
Flashpoint cASTM D92°C250 min
Solubility is CS2(wt) %ASTM  D4Wt. %99.5 max
Spot testA.A.S.H.O.T102—Negative

 

Analysis bitumen 105/35

Bitumen 105/35Test methodUnitSpecification
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.
Penetration @ 25°cASTM  D5mm/1030/40
Softening point °cASTM  D36°C100/110
Loss on heating(wt) %ASTM  D6Wt. %0.2 max
Flashpoint cASTM D92°C250 min
Solubility is CS2(wt) %ASTM  D4Wt. %99.5 max
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.

Analysis oxidized bitumen 105/15

Bitumen 105/15Test methodUnitSpecification
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.
Penetration @ 25°cASTM D5mm/1010/20
Softening point °cASTM D36°C100/110
Loss on heating(wt) %ASTM D6Wt. %0.2 max
Flashpoint cASTM D92°C250 min
Solubility is CS2(wt) %ASTM D4Wt. %99.5 max
Spot testA.A.S.H.O.T102—Negative

 

Analysis bitumen 95/25

Bitumen 95/25Test methodUnitSpecification
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.
Penetration @ 25°cASTM D5mm/1020/30
Softening point °cASTM D36°C90/100
Loss on heating(wt) %ASTM D6Wt. %0.2 max
Flashpoint °cASTM D92°C250 min
Solubility is CS2(wt) %ASTM D4Wt. %99.5 max
Spot testA.A.S.H.O.T102—Negative

 

Analysis asphalt 90/40

Bitumen 90/40Test methodUnitSpecification
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.
Penetration @ 25°cASTM  D5mm/1035/45
Softening point °cASTM  D36°C85/95
Ductility @25 °cASTM  D113Cm5.5min
Loss on heating(wt) %ASTM  D6Wt. %0.2 max
Flashpoint cASTM D92°C250 min
Solubility is CS2(wt) %ASTM  D4Wt. %99.5 max
Spot testA.A.S.H.O.T102—Negative

Analysis bitumen 90/15

Bitumen 90/15Test methodUnitSpecification
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.
Penetration @ 25°cASTM  D5mm/1010/20
Softening point °cASTM  D36°C85/95
Ductility @25 °cASTM  D113Cm1.5min
Loss on heating(wt) %ASTM  D6Wt. %0.2 max
Flashpoint cASTM D92°C250 min
Solubility is CS2(wt) %ASTM  D4Wt. %99.5 max
Spot testA.A.S.H.O.T102—Negative

Analysis asphalt 90/10

Bitumen 90/10Test methodUnitSpecification
Specific gravity @25/25 CASTM D70(Kg/m3)1.05 approx.
Penetration @ 25°cASTM  D5mm/105/15
Softening point °cASTM  D36°C85/95
Ductility @25 °cASTM  D113Cm1.5min
Loss on heating(wt) %ASTM  D6Wt. %0.2 max
Flashpoint cASTM D92°C250 min
Solubility is CS2(wt) %ASTM  D4Wt. %99.5 max
Spot testA.A.S.H.O.T102—Negative
PENETERATION

Specification of bitumen penetration grade 30/40

Bitumen 30/40Test methodUnitSpecification
Specific gravity @ 25°cASTM D70Kg/cm31.01/1.06
Penetration @ 25°cASTM D5mm/1030/40
Softening point °cASTM D36°C55/63
Ductility @25 °cASTM D113cm100 min
Loss on heating(wt) %ASTM D6wt %0.2 max
Drop in penetration after heating %ASTM D5-D6%20 max
Flash point °cASTM D92°C250 min
Solubility is CS2(wt) %ASTM D4wt %99.5 min
Spot testA.A.S.H.O.T102Negative

Specification of bitumen penetration grade 40/50

Bitumen 40/50Test methodUnitSpecification
Specific gravity @ 25°cASTM D70Kg/cm31.01/1.06
Penetration @ 25°cASTM D5mm/1040/50
Softening point °cASTM D36°C52/60
Ductility @25 °cASTM D113cm100 min
Loss on heating(wt) %ASTM D6wt %0.2 max
Drop in penetration after heating %ASTM D5-D6%20 max
Flash point °cASTM D92°C250 min
Solubility is CS2(wt) %ASTM D4wt %99.5 min
Spot testA.A.S.H.O.T102Negative

Specification of bitumen penetration grade 60/70

Bitumen 60/70Test methodUnitSpecification
Specific gravity @ 25°CASTM D70Kg/cm31.01/1.06
Penetration @ 25°CASTM D5mm/1060/70
Softening point °CASTM D36°C49/56
Ductility @25 °CASTM D113cm100 min
Loss on heating(wt) %ASTM D6wt %0.2 max
Drop in penetration after heating %ASTM D5-D6%20 max
Flashpoint °CASTM D92°C232 min
Solubility in TrichloroethyleneASTM D2042wt %99 min
Spot testA.A.S.H.O.T102Negative

Specification of bitumen penetration grade 80/100

Bitumen 80/100Test methodUnitSpecification
Specific gravity @ 25°cASTM D70Kg/cm31.01/1.06
Penetration @ 25°cASTM D5mm/1080/100
Softening point °cASTM D36°C42/50
Ductility @25 °cASTM D113cm100 min
Loss on heating(wt) %ASTM D6wt %0.2 max
Drop in penetration after heating %ASTM D5-D6%20 max
Flash point °cASTM D92°C250 min
Solubility is CS2(wt) %ASTM D4wt %99.5 min
Spot testA.A.S.H.O.T102Negative

Specification of bitumen penetration grade 85/100

Bitumen 85/100Test methodUnitSpecification
Specific gravity @ 25°cASTM D70Kg/cm31.01/1.06
Penetration @ 25°cASTM D5mm/1085/100
Softening point °cASTM D36°C41/49
Ductility @25 °cASTM D113Cm100 min
Loss on heating(wt) %ASTM D6wt %0.2 max
Drop in penetration after heating %ASTM D5-D6%20 max
Flash point cASTM D92°C250 min
Solubility is CS2(wt) %ASTM D4wt %99.5 min
Spot testA.A.S.H.O.T102Negative

Specification of bitumen penetration grade 120/150

Bitumen 120/150Test methodUnitSpecification
Specific gravity @ 25°CASTM D70Kg/m31000-1050
Penetration @ 25°CASTM D5mm/10120/150
Softening point °CASTM D36°C38 min
Ductility @25 °CASTM D113Cm100 min
Loss on heating(wt) %ASTM D6wt %0.5 max
Drop in penetration after heating %ASTM D5-D6%20 max
Flashpoint °CASTM D92°C218 min
Solubility in TrichloroethyleneASTM D2042wt %99 min
Spot test—Negative

Specification of bitumen penetration grade 160/220

Bitumen 160/220Test methodUnitSpecification
Penetration @ 25°cIP 49mm/10160/220
Softening point °cIP 58°C35/43
Kinematic Viscosity @ 135 °CIP 370mm2/s135 min
Flashpoint °cIP 36°C220 min
Solubility is CS2(wt) %IP 47wt %99 min
EMULSION

Specification of bitumen emulsion CSS-1h

Analysis Cationic Bitumen Emulsion

Emulsion Type: Slow-Setting
Grade: CSS-1h
Standard: ASTM D 2397M – 13

PropertyProperty MinMaxTest Method
Test on Emulsions
Viscosity, Saybolt Furol at 25 °C, SFS20100ASTM D244
Storage stability test, 24-h, %–1ASTM D6930
Particle charge testpositiveASTM D244
Sieve test, %–0.1ASTM D6933
Cement mixing test, %2.0ASTM D6935
Distillation:
Residue, %57–ASTM D244
Tests on residue from distillation test:
Penetration, 25°C (77°F), 100 g, 5 s4090ASTM D5
Ductility, 25°C (77°F), 5 cm/min, cm40–ASTM D113
Solubility in trichloroethylene, %97.5–ASTM D2042

Specification of emulsion asphalt CMS-2

Analysis of cationic emulsion asphalt

Emulsion Type: Medium-Setting
Grade: CMS-2
Standard: ASTM D 2397M – 13

PropertyminmaxTest method
Test on emulsions
Viscosity, Saybolt Furol at 50 °C, SFS50450ASTM D244
Storage stability test, 24-h, %–1ASTM D6930
Coating ability and water resistance:
Coating, dry aggregateGoodASTM D244
Coating, after sprayingFairASTM D244
Coating, wet aggregateFairASTM D244
Coating, after sprayingFairASTM D244
Particle charge testPositiveASTM D244
Sieve test, %–0.1ASTM D6933
Distillation:
Oil distillate, by volume of emulsion, %–12ASTM D6997
Residue, %65–ASTM D244
Tests on residue from distillation test:
Penetration, 25°C (77°F), 100 g, 5 s100250ASTM D5
Ductility, 25°C (77°F), 5 cm/min, cm40–ASTM D113
Solubility in trichloroethylene, %97.5– ASTM D2042

Specification of asphalt emulsion CMS-2h

Analysis cationic asphalt emulsion

Emulsion Type: Medium-Setting
Grade: CMS-2h
Standard: ASTM D 2397M – 13

PropertyminmaxTest method
Test on emulsions
Viscosity, Saybolt Furol at 50 °C, SFS40450ASTM D244
Storage stability test, 24-h, %–1ASTM D6930
Coating ability and water resistance:
Coating, dry aggregateGoodASTM D244
Coating, after sprayingFairASTM D244
Coating, wet aggregateFairASTM D244
Coating, after sprayingFairASTM D244
Particle charge testPositiveASTM D244
Sieve test, %–0.1ASTM D6933
Distillation:
Oil distillate, by volume of emulsion, %–12ASTM D6997
Residue, %65–ASTM D244
Tests on residue from distillation test:
Penetration, 25°C (77°F), 100 g, 5 s4090ASTM D5
Ductility, 25°C (77°F), 5 cm/min, cm40–ASTM D113
Solubility in trichloroethylene, %97.5– ASTM D2042

 

Specification of bitumen emulsion CRS-1

Cationic Bitumen Emulsion

Emulsion Type: rapid-Setting
Grade: CRS-1
Standard: ASTM D 2397M – 13

PropertyProperty MinMaxTest Method
Test on Emulsions
Viscosity, Saybolt Furol at 25 °C, SFS20100ASTM D244
Storage stability test, 24-h, %–1ASTM D6930
Demulsibility, 35 mL, 0.8 % dioctyl sodium sulfosuccinate, %40–ASTM D6936
Coating ability and water resistance:
Particle charge testPositiveASTM D244
Sieve test, %–0.1ASTM D6933
Distillation : 
Oil distillate, by volume of emulsion, %–3ASTM D6997
Residue, %60–ASTM D244
Tests on residue from distillation test:
Penetration, 25°C (77°F), 100 g, 5 s100250ASTM D5
Ductility, 25°C (77°F), 5 cm/min, cm40–ASTM D113
Solubility in trichloroethylene, %97.5–ASTM D2042

 

Specification of bitumen emulsion CRS-2

Analysis Cationic Bitumen Emulsion

Emulsion Type: rapid-Setting
Grade: CRS-2
Standard: ASTM D 2397M – 13

PropertyProperty MinMaxTest Method
Test on Emulsions
Viscosity, Saybolt Furol at 25 °C, SFS100400ASTM D244
Storage stability test, 24-h, %–1ASTM D6930
Demulsibility, 35 mL, 0.8 % dioctyl sodium sulfosuccinate, %40–ASTM D6936
Coating ability and water resistance:
Particle charge testPositiveASTM D244
Sieve test, %–0.1ASTM D6933
Distillation : 
Oil distillate, by volume of emulsion, %–3ASTM D6997
Residue, %65–ASTM D244
Tests on residue from distillation test:
Penetration, 25°C (77°F), 100 g, 5 s100250ASTM D5
Ductility, 25°C (77°F), 5 cm/min, cm40–ASTM D113
Solubility in trichloroethylene, %97.5–ASTM D2042

Technical Data Sheet of Cationic Bitumen Emulsion K1-40

NoPropertyTest MethodMinMax
1Saybolt fural viscosity @ 25?C secASTM D224—25
2Storage Stability (24 hours) %ASTM D224—1
3Sieve Test (%)ASTM D224—0.1
4Particle Charge TestASTM D224Positive—
5Solubility in Trichloroethylene (% Mass)ASTM D204297.5—
6Residue from distillationASTM D22437—
7Penetration @ 25?C, 100g, 5secASTM D560200
CUTBACK

Specification of cutback bitumen RC-70

RABIT (RAHA BITUMEN) Co. guarantees that the Rapid curing Cut Back Grade RC-70 it supplies under its offers is produced in compliance to and is in conformity to ASTM D-2028-97 Rev 2004 and is compliant to the following specification requirements.

propertyspecification limit Test method
MinMax
Kinematic viscosity at 60°c ,cST70140ASTM D2170
Flash point(tag open cup), °c— —ASTM D3143
Distillation test
Distillate, volume percent of total Distillate to 680°f(360°c)
to 437°f(225°c)
To 500°f(260°c)
to 600°f(316°c)
Residue from distillation to
680°f(360°c), percent volume by difference		50—ASTM D402
70—
85—
55
Test on Residue from distillation test
Penetration 77°f(25°c) 100g,5s mm80120ASTM D5
Ductility 77°f(25°c) 5cm/min cm100 —ASTM D113
Solubility in trichloroethylene %99—ASTM D2042
Water, percent volume —0.2ASTM D95

Specification of cutback bitumen RC-250

RABBIT (RAHA BITUMEN) Co. guarantees that the Rapid curing CutBack Grade RC-250 it supplies under its offers is produced in compliance to and is in conformity to ASTM D-2028–97 Rev 2004 and is compliant to the following specification requirements.

propertyspecification limit Test method
MinMax
Kinematic viscosity at 60°c ,cST250500ASTM D2170
Flashpoint(tag open cup), °c— 27ASTM D3143
Distillation test
Distillate, volume percent of total Distillate to 680°f (360°c)
to 437°f(225°c)
To 500°f(260°c)
to 600°f(316°c)
Residue from distillation to
680°f(360°c), percent volume by difference		35—ASTM D402
60—
 80—
65—
Test on Residue from distillation test
Penetration 77°f(25°c) 100g,5s mm80120ASTM D5
Ductility 77°f(25°c) 5cm/min cm100—ASTM D113
Solubility in trichloroethylene %99—ASTM D2042
Water, percent volume —0.2ASTM D95

Specification of cutback bitumen RC-800

RABBIT (RAHA BITUMEN) Co. guarantees that the Rapid curing CutBack Grade RC-800 it supplies under its offers is produced in compliance to and is in conformity to ASTM D-2028-97 Rev 2004 and is compliant to the following specification requirements.

propertyspecification limit Test method
MinMax
Kinematic viscosity at 60°c ,cST8001600ASTM D2170
Flashpoint(tag open cup), °c 27—ASTM D3143
Distillation test
Distillate, volume percent of total Distillate to 680°f (360°c)
to 437°f(225°c)
To 500°f(260°c)
to 600°f(316°c)
Residue from distillation to
680°f(360°c), percent volume by difference		 15—ASTM D402
 45—
75—
75 —
Test on Residue from distillation test
Penetration 77°f(25°c) 100g,5s mm80120ASTM D5
Ductility 77°f(25°c) 5cm/min cm100ASTM D113
Solubility in trichloroethylene %99ASTM D2042
Water, percent volume0.2ASTM D95

Specification of cutback bitumen RC-3000

RABBIT (RAHA BITUMEN) Co. guarantees that the Rapid curing CutBack Grade RC-3000 it supplies under its offers is produced in compliance to and is in conformity to ASTM D-2028-97 Rev 2004 and is compliant to the following specification requirements.

propertyspecification limit Test method
MinMax
Kinematic viscosity at 60°c ,cST30006000ASTM D2170
Flashpoint(tag open cup), °c —27ASTM D3143
Distillation test
Distillate, volume percent of total Distillate to 680°F(360°F)
to 437°f(225°c)
To 500°f(260°c)
to 600°f(316°c)
Residue from distillation to
680°f(360°c), percent volume by difference		——ASTM D402
25—
70—
80 —
Test on Residue from distillation test
Penetration 77°f(25°c) 100g,5s mm80120ASTM D5
Ductility 77°f(25°c) 5cm/min cm100ASTM D113
Solubility in trichloroethylene %99ASTM D2042
Water, percent volume0.2ASTM D95